Article provided by: Shoreline Boat & RV Repair
Professional maintenance of your property makes your home enjoyable to live in and increases its value. The same is applicable to your boat. When you do the service with Shoreline Boat & RV Repair in our workshop for boat repair in Austin, TX, you will receive quality work at an affordable price.
Can I use my freshwater boat in saltwater?
Moving your boat from inland to coastal waters is possible, but you will have to change your maintenance habits. Salt in the seawater is corrosive and will affect all the metal parts of a boat. For this reason, your docking habits should change, and you will have to spend more time washing everything.
Along with the cleaning habits, you will also have to change the anodes when moving to saltwater. In freshwater, you use magnesium anodes, but must replace them with aluminum or zinc anodes in a specialized yard for boat repair in Austin, TX.
You have to remember that your engine will have to do the transition, too. If you have an outboard motor, there are no special requirements. You just have to remember to wash it with plenty of fresh water to remove the salt properly.
In case of a sterndrive or inboard/outboard drive, things are a bit different. Most of the modern engines are using a closed cooling system interfacing with the saltwater in a heat exchanger. Also, the transmission fluid and oil may use the heat exchanger for cooling purposes. The salt present in the water will corrode the stainless-steel plates of the exchanger, mixing your fluids, if you do not change the plates to titanium.
When moving to saltwater, you have to make sure the antifouling paint on the bottom of the boat is in good condition and the electrical parts are marine grade. We do not want to scare you, but it is better to be prepared and take all the proper measures for this transition than to be sorry later.
How do you clean a boat after saltwater exposure?
There is no secret that saltwater may wreck your boat if you do not clean it adequately. You should not avoid the sea, but you just have to be cautious, even with the GRP hulls.
After returning from your trip, you have to immediately wash down your boat with fresh water, since it will be easier (and safer) to remove the salt while still wet. You can use a marine type detergent taking special care on all the metal parts.
Another essential step to take is to flush your engine. This way, you will ensure that no salt is left behind to corrode the metal parts.
Is saltwater bad for boats?
Not really if you protect your boat against corrosion in a workshop for boat repair in Austin, TX, before taking it into salty waters. If adequately cleaned after docking, you will have little to no problems with your boat.
Give us a call today and our technicians at Shoreline Boat & RV Repair will salt-proof your freshwater boat. We will also advise on what needs to be done to keep your boat in a perfect state.Boat Repair Austin TX
View Larger Map